中     文

                                             Company Profile                Product                Contact                Main Page


                                            

                                     AFM34

 

                                                            

 

                    Made in Germany.  AFM34 is the most successful material in the product line of Victor Reinz.

                    AFM34 is an asbestos-free material. 

                    It contains aramide fibers, inorganic fillers and other high-temperature resistant substances which are bonded with high strength and                     especially gas-tight under increased pressure and increased temperature.

                    AFM34 does not contain any physiologically harmful substances or colour pigments.

                    AFM34 exhibits high tensile strength plus stress and shearing resistance.

                    The material is ideally suited for sealing gases and fluids, e.g. oils, solvents, fuels, Freons, liquid gases, water/antifreeze mixtures,                     saline solutions and many other media. It is also suitable for sealing hot water and steam up to approx. 200 °C in stationary applications and                     with an installation surface pressure of at least 50 N/mm². Please consult us if you have a specific application.

                    Other characteristic properties of the material are excellent temperature resistance, stress resistance under high operating pressure, and                     ease of handling.

 

                    Applications:

                    • for DIN and ANSI flanged joints, apparatus, pumps, fittings and pipelines in industrial plants

                    • for fittings with very narrow sealing surfaces, e.g. in gas and hot water units, solar panels, convection radiators and couplings, etc

                     • for sealed joints in IC engines subject to high mechanical and thermal stress (oil filters, intake manifolds, water, fuel & vacuum pumps, etc.)

                    • for transmissions, gearboxes, refrigerating & air compressors, etc


                    Since AFM 34 is physiologically safe, it is also suitable for use in contact with drinking water & foodstuffs, and for sealing highly pure,                     pollutant-sensitive products such as paint bases, vitamins, etc.

 

                    Surfaces

                    As standard, both sides of AFM 34 are coated with a non-stick, high-friction layer that greatly facilitates disassembly.

                    In most cases, additional surface treatment is unnecessary.

                    However, a graphite coating on one or both sides of the gasket is recommended when used with components that rotate on the gasket                     during assembly, e.g. in threaded couplings, radiator plugs, etc., as a low friction value is required in these cases.

 

 

 

      Back    

 


大德工業有限公司

台灣桃園市 32063 中壢區南園路 2-56號

TEL:  886-3-4336116        FAX:  886-3-4336119

Email:  service@tamaru.com.tw